TC1-62A-48/TC1-64A-48
Features
- Support up to 48 10/100Base-TX ports and 4 1000 Base SFP ports.
- Support DT-Ring protocol suite, recovery time<50ms. Support multiple protocols such as STP/RSTP/MSTP and VRRP.
- Support QoS, VLAN, SNMP MIB V1/V2/V3, RMON (1, 2, 4, 9).
- Support static routing protocol and dynamic routing protocols such as RIP v1/v2, OSPF v2 and BGP v4.
- Support various multicasting routing protocols such as PIM-SM, PIM-DM, DVMRP and so on.
- 36Gbps Backplane bandwidth, hardware-based routing, wirespeed layer-3 switching and forwarding rate is up to 23.1Mpps.
- Powerful ACL, hardware supports data filtering from L2-L7.
- Auto-detection and control broadcasting storm. Support IGMP V1/V2/V3 message detection, effec-tively preventing broadcast overflow.
- Support flow control in full/half duplex way, the rate control is of the step of 64K for Ethernet port.
- Support QinQ (Double Tagging VLAN).
- Operating temperature: -40 ~ 85°C(-40 ~ 185°F)
- Ribbed Aluminum housing for heat dissipation (patent), fanless.
- IP40 protection class.
- 19 inch 1U Rack-mounting.
Technical Specifications
Standard:
- IEEE802.3, IEEE 802.3u, IEEE 802.3x, IEEE802.3z, IEEE802.3ab, IEEE802.3ae, IEEE802.3ad, IEEE802.1p/q, IEEE802.1d, IEEE802.1w, IEEE802.1x, Store and forward switching mode
Interface:
- 100M Port: 48 (TC1-62A-48/TC1-64A-48) x 10/100Base-TX, adaptive
- Gigabit Port: 2(TC1-62A-48) or 4 (TC1-64A-48) x 1000Base SFP ports
- CONSOLE interface: RS232, RJ45
Performance:
- MLayer 3 forwarding rate: 23.1Mpps at line rate
- Backplane switching capacity: 36G
- Routing table: 30K
- MAC adress table: 16K
- 802.1Q VLAN: any division from 1 to 4094
- Routing Management: static routing, RIP v1/v2, OSPF v2, BEIGRP, BGP v4, IP-based policy routing
- Management: CLI, Telnet, SNMPv1/v2, ToughComvision
Power Requirements:
- Power input: 24VDC (18-36VDC), redundant dual inputs
48VDC(36-72VDC), redundant dual inputs
110VDC(82-185VDC), redundant dual inputs
110VAC/220VAC/220VDC(85-264VAC/120-370VDC), redundant dual inputs
- Input interface: AC power plug.
- Power consumption: <60W
Physical Characteristics:
- Casing: IP40 protection
- Ribbed Aluminum housing fanless design
- Dimensions(WxHxD): 482.6x44x374mm (19x1.73x14.72 inch)
- Weight: 4000g (8.818pound)
- Installation: Rack mounting
Environmental Limits:
- Operating Temperature: -40 ~ 85°C(-40 ~ 185°F)
- Storage Temperature: -40 ~ 85°C (-40 ~ 185°F)
- Humidity: 0 ~ 95% (no condensing)
Warranty:
Approvals:
- IEC61000-4-2(ESD): ±8KV contact discharge, ±15KV air discharge
- IEC61000-4-3(RS): 10V/M (80-1000MHz)
- IEC61000-4-4(EFT): power line±4KV, data line±2KV
- IEC61000-4-5(Surge): power line ±4KV CM/±2KV DM, data line±2KV
- IEC61000-4-6(CS): 3V(10KHZ-150KHZ),10V(150KHz-80MHz)
- IEC61000-4-8(Power frequency magnetic field): 100A/m cont. 1000A/m, 1s to 3s
- IEC61000-4-12/18(Damped oscillatory wave): 2.5KV CM, 1KV DM
- IEC61000-4-10(Damped oscillatory): 30A/m
- IEC61000-4-16(Common mode conduct): 30V cont. 300V, 1s
- FCC CFR47 Part 15/EN55022: Class A&B
- IEC61000-6-2(Industrial Standards),
- IEC61850-3(Substations),
- IEEE1613(Electric Power Substations),
- EN50121-4(Railway Applications)
- CE, FCC, ROHS
Ordering Information
|